FEZ Cerb40 II
FEZ Cerb40 II
Part # CR402-GB-450
1+ $29.95
100+ $25.82 14% Off
In stock

Compare this product to similar products.
  • FEZ Cerb40 II
  • FEZ Cerb40 II

FEZ Cerb40 II is 100% open source hardware board that combines the FEZ Cerberus' 32-bit 168MHz processor and core NETMF software on a very small Sysytem on Module, in a DIP40 format. This board is ideal for low-volume production run and for easy prototyping. Developers normally start with FEZ Cerberus mainboard for easy plug-and-play and then later use FEZ Cerb40 to live permanently in a product.

Whether using .NET Gadgeteer, .NET Micro Framework or even use native programming, developers will enjoy the benefits from FEZ Cerb40.

In comparison with the original Cerb40, the new rev 2 includes the 3.3V regulator and 32.768Khz RTC crystal.

Key Features:

  • .NET Micro Framework (supporting C# and Visual Basic) 
  • 168MHz 32bit STM32F4 processor with floating point.
  • 1MB FLASH and 192KB RAM.
  • Runs FEZ Cerberus software.
  • Very compact yet exposing 36 IOs.
  • Software and hardware support, but not limited to, PWM, AnalogIn, AnalogOut, UART, SPI, I2C, CAN, USB Client, USB Host.
  • Ultra small, 2.0 x 0.75 inches.

Power

  • Runs off single 3.3V power source.
  • Low power and hibernate modes
  • Active power consumption TBD
  • Idle power consumption TBD
  • Hibernate power consumption TBD

Environmental:

  • Operating temperature: TBD
  • RoHS compliant /Lead-free compliant

This product is for users with hardware experience. Software developers can use FEZ Cerberus.

Related Products

FEZ Cerberus Mainboard
FEZ Cerberus is a compact .NET Gadgeteer-compatible Mainboard.
Processor 168 Mhz 32-bit Cortex-M4STM32F405VG
Core System HardwareThe primary hardware system that supports the mainboard Cerberus
System PlatformPrimary system that processes user programs .Net Micro Framework
Development LibrarySDK libraries used for application development OSHWOpen Source Hardware
User Available FlashTotal Flash memory available for user applications 384 KB
User Available RAMTotal RAM memory available for user applications 119 KB Non Ethernet
104 KB Ethernet
The Cerb-Family has two firmware versions depending on need.
GPIOGeneral Purpose Input/Output 34
PWMPulse-Width Modulation 11
Analog In 912 Bit Resolution
UARTUniversal Asynchronous Receiver/Transmitter 4
SPISerial Peripheral Interface Yes
I2CInter-Integrated Circuit Yes
Networking Ethernet TCP/IP
CANController Area Network Yes (Preliminary managed drivers only)
Analog Out 2
USB Client Debugging Only
USB Host No
1-Wire Yes
Real Time Clock Yes
In-Field Update No
Native LCD ControllerSystem has native LCD TFT (RGB) controller NoGraphics through SPI N18 device
Supported Image Type BMP
Memory CardsIncludes 4-bit Secure Digital (SD), Secure Digital High-Capacity (SDHC) and Multi-Media Card (MMC) support. Yes
File SystemFile allocation Read/Write format FAT16/FAT32
Power ConsumptionConsumption during Active / Idle / Sleep states.
Operating Temp. 0°C to +70°C
DimensionsMeasurements in millimeters. 51.35 x 18.3 x 5.55 mm
Weight 8 g
RLPLibrary functions that provide ability to add native C/Assembly code to .Net Micro Framework applications. RLPLite
RLP RAM SizeThe maximum size of the complete native code that can be executed 8 KB Non-Ethernet
12 KB Ethernet
The Cerb-Family has two firmware versions depending on need.
Developers' Guide URL
Schematic PDF
EAGLE files
.BRD and .SCH files
ZIP
3D PDF PDF
3D Models
STEP, 3DS, and STL file formats
ZIP
Dimensions
footprint measurements
PDF