Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length



Pages: [1]
« previous next »
  Print  
Author Topic: Implementing TCP/IP with USBwiz  (Read 373 times)
Mikhail617
Newbie
*
Posts: 11


View Profile
« on: January 13, 2010, 08:22:32 PM »
I noticed some older posts and tutorials that mentioned Microchip's TCP/IP stack. Was this ever implemented? Is it currently supported?Thanks.
Logged
SupportAdmin
Administrator
Hero Member
*****
Posts: 4579



View Profile WWW
« Reply #1 on: January 13, 2010, 08:35:22 PM »
no but take a look at our other devices
Logged
Mikhail617
Newbie
*
Posts: 11


View Profile
« Reply #2 on: January 19, 2010, 12:27:10 PM »
Our project is based on the USBwiz and we would rather not have to port it to a different device just to add TCP/IP interface. I'm wandering if we could use the WIZ812MJ module (or similar) that was used in the USBizi example with the USBwiz?
Logged
SupportAdmin
Administrator
Hero Member
*****
Posts: 4579



View Profile WWW
« Reply #3 on: January 19, 2010, 12:45:24 PM »
USBizi and USBwiz have similar names but they are completely different. You should use USBizi on your new designs.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC